Isoproof®
Cold-applied, liquid waterproofing system for flat roofs and repairs
Impervius®
Spray-applied, waterproofing system for asbestos roofs
EM Primer
EM Primer is a one pack adhesion promoter that can be brush or spray applied acting as sealer on porous substrates such as concrete and will consolidate a friable substrate such as that of asbestos cement. It improves adhesion to difficult substrates such as non-ferrous metals.
EM Grey
EM Grey is a Pu roof coating which can be spray, roller or brush applied to flat or pitched roofs. Unlike over traditional bitumen-based products EM Grey does not embrittle with age, UV exposure or weathering. EM Grey is designed to bond to most substrates commonly used in roofing, such as; felt, asphalt, slate, concrete and many more, this boning can either be directly to the substrate or in conjunction with a suitable primer.
EM Black
EM Black is a Pu roof coating which can be spray, roller or brush applied to flat or pitched roofs. Unlike over traditional bitumen-based products EM Black does not embrittle with age, UV exposure or weathering. EM Black is designed to bond to most substrates commonly used in roofing, such as; felt, asphalt, slate, concrete and many more, this boning can either be directly to the substrate or in conjunction with a suitable primer.
Armour Prime
Armour prime is a two-pack system that acts as a sealer on porous substrates such as concrete and will consolidate a friable substrate such as that of asbestos cement. It acts as a barrier coat on bituminous substrates and improves adhesion to difficult substrates such as non-ferrous metals.
Armour Flex
Armour flex is a sprayable polyurea system which provides a seamless, protective and waterproof coating. Available in black, grey and neutral Armour flex has a gel time of 5-8 seconds and is touch dry in less than 30 greatly increasing the speed of application when compared to alternative coatings. Armour flex comes in a variety of grades including, fire rated and slower set should a project require
Armour-Chem
Armour chem is a sprayable polyurea system characterised by its tough physical properties, high degrees of thermal and hydrologic stabilities as well as its excellent chemical and water resistance. These qualities make it perfect for use in the construction sector for waterproofing, tanking and protection against hail, bird and traffic (when sprayed over polyurethane foam).
Technitherm
TECHNITHERM® is a totally CFC & HCFC FREE two-component, 1:1 mix ratio rigid polyurethane foam which complies with the requirements of BS 7457:1994 for the stabilisation and thermal insulation of masonry cavity walls. It is required that TECHNITHERM® is installed in accordance with BS 7456:1991 Code of Practice by approved installers trained by Isothane Ltd technical staff.
